JM-VL01
Wired into the vehicle
Sold under the Jimi name; a small wired unit with a vibration alarm, common on motorbikes.
The GT06 protocol is spoken by Concox and by a long list of makers who build the same board under their own name, which is why a tracker bought with no brand on it will usually be a GT06. It carries live position, ignition, engine cut and SOS, and the engine relay is supported from the platform.
Connect a JM-VL01
- Server
- device.gpsaero.com
- Port
- 5023
- Protocol
- gt06 (TCP)
Usual configuration by SMS (the password is often 123456):
SERVER,1,device.gpsaero.com,5023,0#
Questions
- Does Aero Global Limited support the JM-VL01?
- Yes. The JM-VL01 is part of the Concox GT06 family and speaks the gt06 protocol, which the platform accepts on port 5023 at device.gpsaero.com.
- How do I connect a JM-VL01?
- Add the tracker in the panel with its IMEI, then set the server address and port 5023 on the device. It appears on the map at its next report - nothing else inside the tracker is changed.
- Can I move a JM-VL01 from another platform?
- Yes. Only the server address changes; the SIM, the IMEI and the wiring stay exactly as they are, so no vehicle has to be visited.
Try it with your JM-VL01
Point one device at the server and watch it on the map before you move anything else.