Concox GT06 GPS tracking software
The most common tracker family in the world: cheap, wired, and sold under dozens of names.
The GT06 protocol is spoken by Concox and by a long list of makers who build the same board under their own name, which is why a tracker bought with no brand on it will usually be a GT06. It carries live position, ignition, engine cut and SOS, and the engine relay is supported from the platform.
Connect a Concox GT06 tracker
- Server
- device.gpsaero.com
- Port
- 5023
- Protocol
- gt06 (TCP)
Usual configuration by SMS (the password is often 123456):
SERVER,1,device.gpsaero.com,5023,0#
Add the tracker in the panel with its IMEI, set the address above on the device, and it appears on the map at its next report. Nothing else inside the tracker is changed, so it keeps doing whatever it did before.
Models in this family
Another model from the same maker will almost always speak the same protocol and connect the same way. If yours is not listed, ask us and we will check it.
Questions
- Does Aero Global Limited support Concox GT06?
- Yes. Concox GT06 trackers (GT06N, GT06E, GT02A, JM-VL01 and others in the family) connect using the gt06 protocol and are supported today.
- Which port does a Concox GT06 tracker use?
- Port 5023 over TCP, at device.gpsaero.com. Set that address and port on the tracker and it will appear on the map as soon as it reports.
- Can I keep my Concox GT06 trackers if I change platform?
- Yes. Nothing is changed inside the tracker except the server address it reports to, so the same hardware keeps working and no vehicle has to be visited.
Try it with your own Concox GT06
Point one tracker at the server and watch it on the map before you move the rest. Nothing is changed on the vehicle.