Ruptela GPS tracking software
Lithuanian trackers built for trucks, with CAN bus reading on the Tco and Pro ranges.
Ruptela reads the vehicle rather than just following it: fuel from the CAN bus, engine hours, driver cards and tachograph data on the heavier models. That makes it a common choice for haulage rather than for a single car.
Connect a Ruptela tracker
- Server
- device.gpsaero.com
- Port
- 5046
- Protocol
- ruptela (TCP)
Add the tracker in the panel with its IMEI, set the address above on the device, and it appears on the map at its next report. Nothing else inside the tracker is changed, so it keeps doing whatever it did before.
Models in this family
Another model from the same maker will almost always speak the same protocol and connect the same way. If yours is not listed, ask us and we will check it.
Questions
- Does Aero Global Limited support Ruptela?
- Yes. Ruptela trackers (FM-Eco4, FM-Tco4, FM-Pro4, FM-Eco4 S and others in the family) connect using the ruptela protocol and are supported today.
- Which port does a Ruptela tracker use?
- Port 5046 over TCP, at device.gpsaero.com. Set that address and port on the tracker and it will appear on the map as soon as it reports.
- Can I keep my Ruptela trackers if I change platform?
- Yes. Nothing is changed inside the tracker except the server address it reports to, so the same hardware keeps working and no vehicle has to be visited.
Try it with your own Ruptela
Point one tracker at the server and watch it on the map before you move the rest. Nothing is changed on the vehicle.