Galileosky GPS tracking software
Russian trackers built for hard conditions and heavy machinery.
Galileosky is common on excavators, generators and agricultural machines, where the interesting data is engine hours, fuel and power take-off rather than road speed. The Base Block range is programmable on the device.
Connect a Galileosky tracker
- Server
- device.gpsaero.com
- Port
- 5034
- Protocol
- galileo (TCP)
Add the tracker in the panel with its IMEI, set the address above on the device, and it appears on the map at its next report. Nothing else inside the tracker is changed, so it keeps doing whatever it did before.
Models in this family
- Base Block
- 7.0
- Boxfinder
- v5.1
Another model from the same maker will almost always speak the same protocol and connect the same way. If yours is not listed, ask us and we will check it.
Questions
- Does Aero Global Limited support Galileosky?
- Yes. Galileosky trackers (Base Block, 7.0, Boxfinder, v5.1 and others in the family) connect using the galileo protocol and are supported today.
- Which port does a Galileosky tracker use?
- Port 5034 over TCP, at device.gpsaero.com. Set that address and port on the tracker and it will appear on the map as soon as it reports.
- Can I keep my Galileosky trackers if I change platform?
- Yes. Nothing is changed inside the tracker except the server address it reports to, so the same hardware keeps working and no vehicle has to be visited.
Try it with your own Galileosky
Point one tracker at the server and watch it on the map before you move the rest. Nothing is changed on the vehicle.