H02 GPS tracking software
A widely copied Chinese protocol found in cheap wired and motorbike trackers.
H02 turns up in the small trackers fitted to motorbikes and three-wheelers, where price decides everything. Position, ignition and engine cut, and not much more.
Connect a H02 tracker
- Server
- device.gpsaero.com
- Port
- 5013
- Protocol
- h02 (TCP)
Add the tracker in the panel with its IMEI, set the address above on the device, and it appears on the map at its next report. Nothing else inside the tracker is changed, so it keeps doing whatever it did before.
Models in this family
- Shenzhen H02
- LK209
- LK210
- MT08
Another model from the same maker will almost always speak the same protocol and connect the same way. If yours is not listed, ask us and we will check it.
Questions
- Does Aero Global Limited support H02?
- Yes. H02 trackers (Shenzhen H02, LK209, LK210, MT08 and others in the family) connect using the h02 protocol and are supported today.
- Which port does a H02 tracker use?
- Port 5013 over TCP, at device.gpsaero.com. Set that address and port on the tracker and it will appear on the map as soon as it reports.
- Can I keep my H02 trackers if I change platform?
- Yes. Nothing is changed inside the tracker except the server address it reports to, so the same hardware keeps working and no vehicle has to be visited.
Try it with your own H02
Point one tracker at the server and watch it on the map before you move the rest. Nothing is changed on the vehicle.