TK103 clones GPS tracking software
The unbranded trackers built on the TK103 design, sold under hundreds of names.
If a tracker arrived in a plain box with a photocopied manual, this is usually what it is. The protocol is text based and well understood, so these devices keep working long after the shop that sold them has gone.
Connect a TK103 clones tracker
- Server
- device.gpsaero.com
- Port
- 5002
- Protocol
- tk103 (TCP)
Add the tracker in the panel with its IMEI, set the address above on the device, and it appears on the map at its next report. Nothing else inside the tracker is changed, so it keeps doing whatever it did before.
Models in this family
- TK103A
- TK103B
- GPS103
- TK106
Another model from the same maker will almost always speak the same protocol and connect the same way. If yours is not listed, ask us and we will check it.
Questions
- Does Aero Global Limited support TK103 clones?
- Yes. TK103 clones trackers (TK103A, TK103B, GPS103, TK106 and others in the family) connect using the tk103 protocol and are supported today.
- Which port does a TK103 clones tracker use?
- Port 5002 over TCP, at device.gpsaero.com. Set that address and port on the tracker and it will appear on the map as soon as it reports.
- Can I keep my TK103 clones trackers if I change platform?
- Yes. Nothing is changed inside the tracker except the server address it reports to, so the same hardware keeps working and no vehicle has to be visited.
Try it with your own TK103 clones
Point one tracker at the server and watch it on the map before you move the rest. Nothing is changed on the vehicle.